ELECTRONIC COMPONENTS DISTRIBUTOR WITH OVER 960,000 COMPONENTS IN STOCK
ICs, semiconductors, capacitors, resistors, connectors, relays,
switches, sensors, fuses, and thousands of other active and
passive components.
SERVING TODAY’S MOST ADVANCED INDUSTRIES
Supplying critical electronic components to the automotive,
aerospace, robotics, drone technology, medical, industrial, and
advanced manufacturing industries.
GLOBAL SUPPLY. FAST RESPONSE. RELIABLE.
Line Items we carry
3M PRODUCTS | GENERAL INSTRUMENT | PREH |
ABRACON | GRAYHILL | RCA |
ADAM TECH | GUARDIAN | RCD |
ADAM TECH | HARRIS | RIACON |
AGILENT | HEWLETT PACKARD | ROEDERSTEIN |
ALCO | HI-G | ROEDERSTEIN |
ALCO | HITACHI | ROHM |
ALLEN BRADLEY | HYUNDAI | ROHM |
ALLEN BRADLEY | INFINEON | RUBYCON |
ALPHA | INTEL | RXD |
ALTERA | INTERNATIONAL POWER | SAMSUNG |
AMD | INTERSIL | SAMSUNG |
AMERICAN OPTO | INTL. RECTIFIER | SAMTEC |
AMERICAN ZETTLER | KELTRON | SENIOR |
AMP | KEMET | SIGNAL |
AMPHENOL | KEYSTONE | SIGNETICS |
ANALOG DEVICES | KINGBRIGHT | SILICON GENERAL |
AROMAT | KINGS | SMITH H.H. |
ATMEL | KOA | SOLA |
AUGAT | KULKA | SOLID STATE |
AVX | LATTICE | SOLITRON |
BECKMAN | LITTELFUSE | SPECTROL |
BELDEN | LUMEX | SPECTRUM CONTROLS |
BOURNS | MAGNECRAFT | SPRAGUE |
BUCHANAN | MALLORY | STANCOR |
BURR BROWN | MANHATTAN | STANDEX |
BUSSMANN | MARCON | ST. MICRO |
CANNON | MATRIX SCIENCE | SUPERIOR |
CATAMOUNT | MAXIM | SURGE |
CENTRALAB | McGILL | SWITCHCRAFT |
CENTRALAB | MICRON | TAITRON |
CHERRY | MICRO SEMI | TAIYO YUDEN |
CHICAGO MINIATURE | MICRO SWITCH | TAIYO YUDEN |
CINCH | MILL-MAX | TDK |
C&K | MILL-MAX | TE |
CLAROSTAT | MITSUBISHI | TECCOR |
CORNELL DUBILIER | MOLEX | TEXAS INSTRUMENTS |
CREE | MOTOROLA | THOMAS & BETTS |
CTS | MURATA | TOCOS |
CTS | NATIONAL SEMI. | TOSHIBA |
CTS | NEC | TYCO |
CUTLER HAMMER | NEW JERSEY SEMI. | TYCO |
DALE | NIC | TYTON |
DELTROL | NIC | UNITRODE |
DIALIGHT | NICHICON | USD/MAGNUM |
DIODES INC | NKK | VARO |
DURACELL | OHMITE | VISHAY |
EAGLE | OMRON | VITRAMON |
EBY | ONSEMI | WALDOM |
ECS | PANASONIC | WALDOM |
ELECTRIC HARDWARE | PANASONIC | WALDOM |
ELECTROSWITCH | PANASONIC | WECO |
EPSON | PANASONIC | WICKMAN |
EVEREADY | PANASONIC | WIMA |
FAIRCHILD | PANDUIT | XICOR |
FCI/BERG | PHILIPS | XILINX |
FOX | PIHER | YAGEO |
FREESCALE | POMONA | ZETEX |
FUJITSU | POTTER & BRUMFIELD | ZILOG |
Unlock the Value of Your Excess Inventory — Email Us Your Stock List and We’ll Make You a Competitive Same-Day Offer.
Choose the option that works best for you—we’ll buy your excess inventory or sell it on consignment for the highest possible return
This year alone, we’ve purchased over $4 million worth of excess electronic component inventory from companies around the world
ELECTRONIC COMPONENT QUALITY ASSURANCE
Our dedicated quality assurance team combines advanced inspection technology with comprehensive counterfeit mitigation procedures to verify the authenticity, functionality, and reliability of every electronic component—providing complete confidence in your supply chain.
INBOUND SHIPPING INSPECTION
- Vendor Documentation
- Verification & Shipping
- Container Condition Assessment
RECEIVING INSPECTION
- Incoming Shipment Review & Verification
- Purchase Order (PO) Confirmation
- Carton Count & Received Quantity Verification
- Part Number & Product Identification
- Shipment Tracking Information Validation
- Packaging Integrity & Physical Condition Assessment
PRODUCT IDENTIFICATION & TRACEABILITY REVIEW
- Component Authentication & Data Validation
- OEM Product Identification Reference
- Original Component Manufacturer (OCM)
- Production Date Identification
- Batch / Serialization Traceability
- Received Unit Count Confirmation
- Manufacturing Origin Verification
COMPONENT QUALITY ASSESSMENT
- Physical Examination & Technical Conformance Review
- Product Labeling & Identification Review
- Technical Specification Cross-Reference
- Component Package Measurement Verification
- External Condition Assessment
- Detailed Examination of Device Markings, Housing & Terminations
- Device Marking Durability Evaluation
ADVANCED COMPONENT TESTING & ANALYSIS
- Decapsulation Analysis – Internal die examination through controlled package removal to evaluate device construction and internal characteristics.
- Solderability Evaluation – Assessment of component leads and terminations to verify proper solder wetting and connection capability.
- Heated Dynasolve Examination – Controlled chemical exposure using heated Dynasolve to evaluate component surfaces, coatings, and package characteristics.
- 1-Methyl-2-Pyrrolidinone (NMP) Evaluation – Chemical testing utilizing NMP under controlled conditions to examine surface materials, markings, and coatings.
- Scanning Electron Microscopy (SEM) – High-magnification microscopic analysis used for detailed examination of component surfaces, materials, and physical features.
- Electrical Performance Testing – Verification of applicable electrical characteristics and functional parameters against specified component requirements.
OUTBOUND SHIPPING & ORDER VERIFICATION
- Sales Order Validation – Confirm the applicable sales order number and ensure the shipment corresponds with the authorized customer order.
- Product Identification Verification – Review the manufacturer part number to confirm the correct components have been selected for shipment.
- Internal Lot Traceability – Verify the assigned Velocity lot number to maintain complete product identification and material traceability.
- Final Quantity Confirmation – Confirm the total number of units being shipped matches the quantity specified on the sales order.
- Transportation Method Review – Verify the designated carrier, service level, and approved method of transportation prior to shipment release.
- Shipping Terms Confirmation – Review the applicable freight terms and delivery requirements to ensure compliance with the customer’s order instructions.
INBOUND SHIPPING INSPECTION
- Vendor Documentation
- Verification & Shipping
- Container Condition Assessment
RECEIVING INSPECTION
- Incoming Shipment Review & Verification
- Purchase Order (PO) Confirmation
- Carton Count & Received Quantity Verification
- Part Number & Product Identification
- Shipment Tracking Information Validation
- Packaging Integrity & Physical Condition Assessment
PRODUCT IDENTIFICATION & TRACEABILITY REVIEW
- Component Authentication & Data Validation
- OEM Product Identification Reference
- Original Component Manufacturer (OCM)
- Production Date Identification
- Batch / Serialization Traceability
- Received Unit Count Confirmation
- Manufacturing Origin Verification
COMPONENT QUALITY ASSESSMENT
- Physical Examination & Technical Conformance Review
- Product Labeling & Identification Review
- Technical Specification Cross-Reference
- Component Package Measurement Verification
- External Condition Assessment
- Detailed Examination of Device Markings, Housing & Terminations
- Device Marking Durability Evaluation
ADVANCED COMPONENT TESTING & ANALYSIS
- Decapsulation Analysis – Internal die examination through controlled package removal to evaluate device construction and internal characteristics.
- Solderability Evaluation – Assessment of component leads and terminations to verify proper solder wetting and connection capability.
- Heated Dynasolve Examination – Controlled chemical exposure using heated Dynasolve to evaluate component surfaces, coatings, and package characteristics.
- 1-Methyl-2-Pyrrolidinone (NMP) Evaluation – Chemical testing utilizing NMP under controlled conditions to examine surface materials, markings, and coatings.
- Scanning Electron Microscopy (SEM) – High-magnification microscopic analysis used for detailed examination of component surfaces, materials, and physical features.
- Electrical Performance Testing – Verification of applicable electrical characteristics and functional parameters against specified component requirements.
OUTBOUND SHIPPING & ORDER VERIFICATION
- Sales Order Validation – Confirm the applicable sales order number and ensure the shipment corresponds with the authorized customer order.
- Product Identification Verification – Review the manufacturer part number to confirm the correct components have been selected for shipment.
- Internal Lot Traceability – Verify the assigned Velocity lot number to maintain complete product identification and material traceability.
- Final Quantity Confirmation – Confirm the total number of units being shipped matches the quantity specified on the sales order.
- Transportation Method Review – Verify the designated carrier, service level, and approved method of transportation prior to shipment release.
- Shipping Terms Confirmation – Review the applicable freight terms and delivery requirements to ensure compliance with the customer’s order instructions.
Contact Us :
Electronic Components Pty Ltd staff are available to assist you in sourcing your electronic component requirements.
You can reach us via phone, via email
Head Office & Warehouse :
Vowstok Corporate Head Office
- Location: OFFICE NO 12 ON 19 FLOOR HO KING COMMERCIAL CENTRE NO 2-16 FA YUEN ST MONGKOK KL HONGKONG
- Business Hours: Monday – Friday: 09:00 to 17:00 Sydney Time.
Product Enquiries:
Please click our “Part Number Search” to contact us for a RFQ for any component that you know the manufacturer’s part number.